- Achieves the highest brightness in its class^*1 at 7,500 lumens, featuring high-resolution SXGA⁺ (1,400 x 1,050) and Twin Color Wheel System using two UHP 330-watt lamps, with greatly increased light output efficiency.
- Capable of projecting images approximated to DICOM Part 14 (grayscale standard display function) via 'DICOM Simulation Mode'^*2, one of the display settings, a format standard for digital imaging and communications in medicine.
- Projects X-ray pictures clearly and precisely; making it ideal for use in medical education.

*1 As of the time of sales on August, 2009, for the PDG-DET100JL - a 2-lamp SXGA⁺ (1,400 x 1,050 dots) 1-chip DLP^® projector
*2 DICOM (Digital Imaging and Communications in Medicine) is an international standard for digital imaging and communications in medicine. This product is not a device for medical diagnosis. Do not use this product for actual medical diagnosis.

- Achieves a high brightness of 5,000 lumens and a high contrast of 3000:1 with one lamp projection by high-resolution Wide XGA (1,280 x 800 dots) and a new optical engine with an inorganic panel.
- The 'Lamp Selection System' automatically^*4 selects one of the two installed lamps to project from, making approximately 6,000 hours^*3 of projection possible, or about twice as long as conventional one-lamp models.
- The 'Lamp Selection System' has two different modes to choose from:
1. 'Alternating Mode'-alternately uses the two lamps
2. 'Relay Mode'-uses one lamp until recommended lamp replacement time, then switches to other lamp.
- Since the second lamp is already loaded, if one lamp fails, important meetings and presentations can be seamlessly continued without stopping to replace a lamp, in addition to reducing maintenance cost.

*3 When Lamp control "ECO1" mode is selected; the replacement time is a general estimate.
*4 Can be manually switched.

- 'Picture-in-Picture Mode' and 'Picture-by-Picture Mode' can project two images simultaneously, allowing two sources to be viewed to introduce a product or point.
- 'Picture-in-Picture Mode' displays a sub-screen on the main screen, and the location can be precisely set^*5 according to needs.
- 'Picture-by-Picture Mode' displays two images on one screen side-by-side, allowing people on a television conference call to see the presenter and the presentation at the same time.

*5 ['Picture-in-Picture Mode': Sub-screen Display Location]
- PDG-DET100JL: Can be placed anywhere
- LP-WTC500L: Can be placed in one of the four corners: upper left /upper right / lower left / lower right

[Both the PDG-DET100JL and LP-WTC500L]
(1) 'Active Maintenance Filter' System enabling a filter life of 35,000 hours (the longest in the industry^*6) for the PDG-DET100JL and 13,000 hours^*7 for the LP-WTC500L.

(2) 'Vertical 360-degree Tilt Angle Projection' allows projection on the ceiling, floor, etc.
(3) Enhancement of Installation versatility by 'Power Vertical/Horizontal Lens Shift' function & 'Lens Center Layout' symmetrical design
(4) Mechanical Shutter completely blocks out lamp light.
(5) 'IC-equipped Lamp Box for Projection Time Management' enabling management of the projection time for each lamp.

*6 As of the time of sales on August, 2009, when Lamp control "ECO1" mode is selected. Based on JIS D-0207 accelerated testing environment conditions (25,000 hours when Lamp control "Normal" mode is selected)
*7 When Lamp control "ECO1" mode is selected. Based on JIS D-0207 accelerated testing environment conditions (10,000 hours when Lamp control "Normal" mode is selected)

[PDG-DET100JL]
(1) Dust-resistant 'Sealed Optical Engine' maintains stable high-performance by preventing dust build-up.
(2) Compatible with 2 different types*8 of user-changeable color wheels allowing High Brightness or Rich Color Reproduction.
(3) Equipped with 'Edge Blending' function that allows what feels like boundary-less images with multi-image display possibilities.
(4) 'Color Matching' function enabling variation correction in color reproduction when using more than one projector.

*8 The color wheel set for higher brightness is installed in the projector at the time of shipping. A color wheel set for rich color reproduction is included in the package.

[Environmental Considerations]
(1) These products conform with the EU RoHS Directive^*9
(2) The packaging contains pulp molds, which can be recycled as used paper

*9 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations

　For 2009, the volume of shipments to the global market of high-resolution projectors with a brightness of 5,000 lumens or more and compatible with Wide XGA or higher is estimated to be equal to that of last year, and it is forecast to grow approximately 1.5 times each year from 2010 onward (according to company forecasts).
　In recent years, there is a growing need for large-screen projection in certain specialized fields, such as digital signage and design/CAD. With the expansion of the market, higher resolution and higher brightness are in demand.
　The PDG-DET100JL is compatible with high-resolution SXGA+ (1,400 x 1,050 dots) and has the highest brightness in its class^*1 at 7,500 lumens. In addition, 'DICOM Simulation Mode'^*2 precisely reproduces medical-related high-resolution data which makes it ideal for use at medical education institutions.
　The LP-WTC500L is compatible with high-resolution Wide XGA and has a high-brightness of 5,000 lumens. Its 'Lamp Selection System' automatically selects one of the two installed lamps to project from, enabling the lamp replacement interval to be twice as long as conventional one-lamp models.
　Both projectors feature 'Picture-in-Picture Mode' and 'Picture-by-Picture Mode' for projecting two images simultaneously, thus broadening the range of presentation options.

*1 As of the time of sales on August, 2009, for the PDG-DET100JL - a 2-lamp SXGA⁺ (1,400 x 1,050 dots) 1-chip DLP^® projector
*2 DICOM (Digital Imaging and Communications in Medicine) is an international standard for digital imaging and communications in medicine. This product is not a device for medical diagnosis. Do not use this product for actual medical diagnosis.

Global Communications Department
Corporate Communications Headquarters
Tel: +81-3-6414-8621
Fax: +81-3-6414-8720
E-mail: i_press@sanyo.com